*Configuring GPRS Settings On Globe*

Activating GPRS Settings

Set-up Access Point
1. Go to SETTINGS
2. Choose CONFIGURATION
3. Choose PERSONAL CONFIG.SETTINGS
4. Click OPTIONS (right of your screen)
5. Choose ADD NEW
6. Choose ACCESS POINT
7. On the ACCOUNT NAME and type MYGLOBE CONNECT (small caps)
8. on DATA BEARER and select PACKET DATA
9. choose BEARER SETTINGS
10. select PACKET DATA ACCESS POINT and type WWW.GLOBE.COM.PH then click OK.
11. choose NETWORK TYPE and select IPv4
12. Choose AUTHENTICATION TYPE and select NORMAL

Set-up Web Access
1. Follow steps 1-5 on set-up access point
2. Choose WEB
3. on ACCOUNT NAME and type MYGLOBE CONNECT (small caps)
4. choose HOMEPAGE and type http://www.globe.com.ph/globe.asp.
5. choose USE PREFERRED ACCESS PT and select NO
6. go to ACCESS POINT SETTINGS
7. Sect PROXY and choose ENABLED.
8. Choose PROXY ADDRESS and type 203.177.42.214
9. Choose PROXY PORT and type 8080
10. choose DATA BEARER and select PACKET DATA
11. Make sure that the following entries are on the BEARER SETTINGS:
Packet data access pt = www.globe.com.ph Network type = IPv4


Set-Up Streaming
1. Follow steps 1-5 on set-up access point.
> Then choose STREAMING - Updated
2. Choose ACCOUNT NAME and type MYGLOBE STREAM (small caps)
3. Choose UDP PORT RANGE and type 1024-65535
4. choose USE PREFERRED ACCESS PT and select NO
5. Choose ACCESS POINT SETTINGS.
6. Select PROXY and choose DISABLED

That’s it… You’re settings are now configured.. now you have to tell your Cellphone to use this settings:

1. Go to SETTINGS.
2. Select CONFIGURATION
3. Choose DEFAULT CONIGURATION SETTINGS.
4. Select PERSONAL CONFIGURATION
5. Choose OPTIONS (right of your screen)
6. Select SET AS DEFAULT.
7. You will return in the CONFIGURATION submenu… Choose ACTIV.DEFAULT IN ALL APPS.